Injector Dynamics Fuel Injectors - ID2600x

If you're looking to add port fuel injector to your build, via one of our adapters, you'll need some fuel injectors. We offer Injector Dynamics Fuel Injectors in various sizes, since these are some of the best injectors on the market. Same injectors we use in our builds, including our record setting Mazdaspeed6. These injectors are 34mm tall, but they come with spacers to make them 48mm tall. Both sizes work with our adapters and manifolds. The o-rings at both ends are 14mm. Have a question on what size you should get? Don't hesitate to reach out to us! ID1050x Nominal Flow Rate – 1065cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)Maximum Differential Fuel Pressure – 10.0 Bar (145.0 psi)Fuel Compatibility – Compatible With All Known FuelsElectrical Connector – USCAR ID1300x Nominal Flow Rate – 1335cc/min @ 3.0 Bar (43.5 psi) Using Iso Octane at 52 Degrees C (125 Degrees F)Maximum Differential Fuel Pressure – 7.0 Bar (101.5 psi)Fuel Compatibility – Compatible With All Known Fuels – (Designed Specifically for Alternative Fuels)Electrical Connector – USCAR ID1750x Nominal Flow Rate – 1728cc/min @ 3.0 Bar (43.5 psi), Using E10 Emissions Certification Fuel at 49 Degrees C (120F)Maximum Differential Fuel Pressure – 7.0 Bar (101.5 psi)Fuel Compatibility – Compatible with Methanol/Ethanol/MTBE/Nitromethane/All Known Hydrocarbon Fuels.Electrical Connector – USCAR ID2600x Nominal Flow Rate – 2600cc/min @ 3.0 Bar (43.5 psi)Maximum Differential Fuel Pressure – 9.0 Bar (130.5 psi) – Requires Minimum 11volt.Fuel Compatibility – Compatible with Methanol/Ethanol/All Known Hydrocarbons. NOT Compatible with Ethers (MTBE, ETBE, TAME) or Nitro MethaneElectrical Connector – USCAR Please note, these are NOT direct injection injectors. This are intended for adding additional injectors to a DI setup.